DO IT1 LED juggling ball
1 rope dart
1 camera with adjustable shutter speed
1 hefty dose of Excellent People
So, a while ago I made a set of glow balls for juggling in the dark... alas, they did not work well, as the constant jarring and poor connections caused them to flash on and off, and the LEDs were hard to look at when they flashed into my eyes. But as with any "failed" project, they can be repurposed! (This is why I am a packrat.)
Each consists of, from the inside out: a 9V battery, white fabric dipped in glow paint, three LEDs, and several layers of cellophane for light diffusion. The stiff fabric holds its shape well, so the battery can easily be switched out. The LEDs are hooked up in parallel, like so:
The long leg of each LED is its positive side (oriented toward the battery's positive terminal, or the red wire on a 9V connector pad). This basic circuit is wrapped around the ball, and the wire ends are duct taped to the battery. The positive end is disconnected when the ball is not in use.
Each consists of, from the inside out: a 9V battery, white fabric dipped in glow paint, three LEDs, and several layers of cellophane for light diffusion. The stiff fabric holds its shape well, so the battery can easily be switched out. The LEDs are hooked up in parallel, like so:
The long leg of each LED is its positive side (oriented toward the battery's positive terminal, or the red wire on a 9V connector pad). This basic circuit is wrapped around the ball, and the wire ends are duct taped to the battery. The positive end is disconnected when the ball is not in use.
For this project, I took one ball and wrapped it in a wire cage (separated from the LED wires) to attach it to the rope dart. That is attached to a keychain with a swivel, so it can rotate freely, and then hooked to the dart chain with a screw link.
The wire cage presses the battery terminals against the wires, helping the lights stay constantly lit. The smoother motion of the rope dart (as compared to random impacts, with juggling) also aids in this respect.
Rope dart assembly. There's a metal crimp thingy and loop separator thingy, whose precise names I've now forgotten, but which help to keep the 1/4" nylon rope secure and unfrayed. The rope ends in a chain, which is standard and will be very useful when I make a fire head for this thing! *anticipatory hand-rubbing and cackling*
The original head was made with 12 dead AA batteries duct taped to an eye hook, with a stopper and nut on the other end of the hook to keep the batteries from flying off. That was very, very painful when it hit me in the shin/head/back/other shin, so I took 6 batteries off and now it only hurts quite a lot. The glow head will probably stay on for a while, as it's lighter and softer, and not at all likely to cause concussions. Delightful!
On the first night of experimentation, my droog Eric took most of the photos, so mighty props to him. Here you can see the rope wrapping around my neck, which is my favorite move with the rope dart... a full one looks like this:
UFO TYMEAnd then, of course, you can draw... for most of these, we have the camera set to take 10-second exposures.
Eric makes a really awesome thing while trying to draw a triangle and label the sides.
My mom, Lori, realizes that one can flip the image in post-production... thus, writing backwards is not strictly required. The red LED is a little throwie I made using two little batteries and a metal bar that connects the battery terminals when pressed... so it can actually be turned on and off if you want space between your letters (fancy that!). The swirls are me running around her with the rope dart.
Lori
my main droog Naomi
me
And then Dokta Funk picked up the rope dart and blew our minds with his ambient illumination.
And that was that.
